top of page

Load data for .450 Marlin + .458 | 300gr | Nosler MZ

Recommended Powder(s): Accurate No. 11 FS, Vihtavuori N110

.450 Marlin + .458 | 300gr | Nosler MZ

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.458 | 300gr | Nosler MZ
Manufacturer SKU:
50300
Bullet Weight:
300gr | 19.4g
Bullet Diameter:
0.458" | 11.63mm
Bullet Length:
0.999" | 25.4mm
Caliber:
.450 Marlin load data
Case Length (l3):
2.080" | 52.8mm
Cartridge Length (C.O.L.):
2.512" | 63.8mm
Seated Depth:
0.567" | 14.4mm
Shank Seated Depth:
0.567" | 14.4mm
Case Capacity:
74.0 Grains of Water | 4.80 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
47863 psi | 3300 bar
LID:
LID_B4208_C763
Last updated:
2025-01-01

Load data for 32 loads in caliber .450 Marlin with .458 | 300gr | Nosler MZ bullet and 16 powders such as Accurate No. 11 FS, Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 16.4 fps

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
91%
89%
100%
ADI AR 2207
97%
60%
95%
Accurate 5744
89%
90%
95%
Accurate No. 11 FS
89%
89%
99%
Hodgdon LilGun
85%
88%
100%
IMR 4227
97%
84%
97%
Lovex D060
90%
88%
95%
Lovex D063
88%
89%
95%
Lovex S040
83%
89%
100%
Lovex S053
97%
77%
99%
ReloadSwiss RS 36
97%
78%
96%
SNPE Vectan BA6 1/2
96%
72%
100%
Shooters World Blackout
88%
89%
95%
Shooters World Buffalo Rifle
90%
88%
95%
Vihtavuori N110
95%
89%
100%
Vihtavuori N120
96%
57%
95%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
81%
66%
98%
ADI AR 2207
87%
46%
90%
Accurate 5744
81%
71%
92%
Accurate No. 11 FS
81%
68%
96%
Hodgdon LilGun
81%
75%
100%
IMR 4227
81%
51%
90%
Lovex D060
81%
67%
92%
Lovex D063
81%
72%
93%
Lovex S040
81%
82%
100%
Lovex S053
81%
48%
95%
ReloadSwiss RS 36
84%
52%
90%
SNPE Vectan BA6 1/2
81%
46%
100%
Shooters World Blackout
81%
72%
93%
Shooters World Buffalo Rifle
81%
67%
92%
Vihtavuori N110
81%
58%
100%
Vihtavuori N120
85%
41%
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page